Chapter 20.20 MECHANICAL CODE
Section 20.20.090 Applicability to new buildings and additions.
1. All new mechanical HVAC work performed in new buildings must comply with
all provisions of this
code.
2. All mechanical HVAC work performed in new buildings must be performed by
licensed mechanical
contractors utilizing licensed or unlicensed employees.
3. When a permit is issued for a new addition to an existing structure, the
inspector will inspect the new
work up to the point of connection to the existing air supply and return and gas service only. Neither
the
inspector nor the mechanical contractor will assume any responsibility for the condition or safety of
the
existing mechanical system. EXCEPTION: If, in the course of inspecting the new work, the inspector
notices any existing unsafe or hazardous conditions, the inspector will issue a written notice to the
owner
either recommending or directing that repairs be made, depending upon the nature and degree of hazard.
4. Existing buildings to which new additions are being attached must be updated
and brought into
compliance with this code when they are found to be unsafe due to any of the following:
a. The existing mechanical HVAC system has been improperly
installed or maintained.
b. The existing mechanical HVAC system has been added
to, removed, or tampered with in a manner
which creates an unsafe condition. (Ord. 2000-9735; 90/T-9325)